KWP2000 Vehicle Bus Module

Part Number:	EVBM-KWP2000
Product Type:	eDAQ/eDAQ-lite Accessory
Buy Now:	Please contact us, or your sales representative, to make a purchase.

Overview
Product Specifications
Cables/Accessories

Overview

The SoMat KWP2000 Vehicle Bus Module (EVBM-KWP2000) conditions ISO 9141 / KWP2000 vehicle network parameters to be synchronously measured by eDAQ and eDAQ-lite systems.

Up to 254-channels can be conditioned per VBM Module. It can be used as a passive eavesdropper on the controller network, or when needed, become an active participant making requests for specific information. A simple ‘logical masking’ scheme is utilized to identify required frames in an easily managed textual database which identifies where a unique message lay within the frame. By using these methods, not only is it a very short learning curve to master, but it is easily manipulated using tools such as Microsoft Excel® where PGN’s (Parameter Group Numbers), PID’s (Parameter Identifiers) or even direct address information can be added or modified.

Product Specifications

Physical

Size: 1.25” W x 3.00” L x .675” H (3.175cm W x 7.6cm L x 1.7cm H)
Weight: .16 lbs (.07 kg)
Temperature: -20° C to 65° C
Connectors: SoMat M8 Male/Female

Inputs

Available Channels: Includes ISO 9141 OBDII Database

Physical

Size: 1.25” W x 3.50” L x .675” H (3.175cm W x 8.8cm L x 1.7cm H)
Weight: .16 lbs (.07 kg)
Temperature: -20° C to 65° C
Connector: SoMat M8 Male/Female

Inputs

Number of Inputs: 1
Protocol: 2.0A, 2.0B
Selectable Baud Rates (bps): 1M, 500K, 400K, 250K, 125K, 100K, 50K and 41.6K
Available Channels: Up to 254; includes SAE J1939 Database

Cable Pin Outs

The ISO9141/KW2000 hardware interface Vehicle Bus Module cable pin outs are listed in the following table.

NOTE: The VBAT+ voltage must always be provided for this module to function.

Function Wire Color

ISO9141 K-Line White

ISO9141 L-Line Green

VBAT+ Red

AGnd (bare wire)