ELLB Transducer Cable, 6-wire, Analog Out (11 m)

Overview

The SoMat SAC-EXDUC-6-V Low Level Board Cable (SAC-EXDUC-6-V) is a high-quality pre-molded cord set with tinned pigtail wires for transducer wiring. The SAC-EXCUC-6-V additionally has (4) analog out cables with individual BNC connectors. It is exclusively used on the SoMat eDAQ ELLB.

Product Specifications

Physical

Length: 11 Meters
Temperature: to 80˚C
Connectors:

Type:

37-Pin HD D-Sub (1)
BNC (4)

Conductors:

(4) Cables - 6 x 26 AWG
(4) Cables - 2 x 26 AWG Analog Out

Cord Set:

Wiring Codes:

Channel 1/Channel 5 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	35	Red *	-Excitation	15	Black
+Signal	16	White	-Signal	33	Green *
+Calibration	34	Blue	-Calibration	14	Brown
Ground	17	(Shield)
Channel 2/Channel 6 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	13	Red *	-Excitation	30	Black
+Signal	31	White	-Signal	11	Green *
+Calibration	12	Blue	-Calibration	29	Brown
Ground	32	(Shield)
Channel 3/Channel 7 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	28	Red *	-Excitation	8	Black
+Signal	9	White	-Signal	26	Green *
+Calibration	27	Blue	-Calibration	7	Brown
Ground	10	(Shield)
Channel 4/Channel 8 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	6	Red *	-Excitation	23	Black
+Signal	24	White	-Signal	4	Green *
+Calibration	5	Blue	-Calibration	22	Brown
Ground	25	(Shield)

* NOTE: For Quarter Bridge configuration only, wire colors for +Excitation and -Signal are reversed (i.e., +Excitation is Green, and -Signal is Red).

Analog Out
Function	Pin	Wire Color	Function	Pin	Wire Color
Volt Out 1/5	19	Brown	Ground 1/5	18	Black
Volt Out 2/6	37	Red	Ground 2/6	36	Green
Volt Out 3/7	2	Orange	Ground 3/7	3	White
Volt Out 4/8	20	Yellow	Ground 4/8	21	Blue
Ground	1	(Shield)