Low Level Board Transducer Cable (2 m)

Overview

The SoMat eDAQ Low Level Board Transducer Cable (SAC-EXDUC) is a high-quality pre-molded cord set with tinned pigtail wires for transducer wiring. It is exclusively used on the SoMat eDAQ ELLB.

Product Specifications

Physical

Length: 2 Meters
Temperature: to 80˚C
Connectors:

Type: 37-Pin HD D-Sub
Conductors: (4) Cables - 6 x 26 AWG

Cord set:

Wiring Codes:

Channel 1/Channel 5 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	35	Red *	-Excitation	15	Black
+Signal	16	White	-Signal	33	Green *
+Calibration	34	Blue	-Calibration	14	Brown
Ground	17	(Shield)
Channel 2/Channel 6 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	13	Red *	-Excitation	30	Black
+Signal	31	White	-Signal	11	Green *
+Calibration	12	Blue	-Calibration	29	Brown
Ground	32	(Shield)
Channel 3/Channel 7 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	28	Red *	-Excitation	8	Black
+Signal	9	White	-Signal	26	Green *
+Calibration	27	Blue	-Calibration	7	Brown
Ground	10	(Shield)
Channel 4/Channel 8 Cable
Function	Pin	Wire Color	Function	Pin	Wire Color
+Excitation	6	Red *	-Excitation	23	Black
+Signal	24	White	-Signal	4	Green *
+Calibration	5	Blue	-Calibration	22	Brown
Ground	25	(Shield)

* NOTE: For Quarter Bridge configuration only, wire colors for +Excitation and -Signal are reversed (i.e., +Excitation is Green, and -Signal is Red).