eDAQ-lite Simultaneous High Level Layer

Overview

The SoMat eDAQ-lite Simultaneous High Level Layer (ELHLS) offers 4 simultaneously sampled high-level differential analog inputs through independent connectors. Up to eight ELHLS layers can be added to a single eDAQ-lite system enabling up to 32 channels. Networking multiple eDAQ’s make synchronous ELHLS channel counts virtually limitless.

The ELHLS can inherently handle any analog input from +/- 80V, and together with the SoMat SMART conditioning modules, is a real multipurpose layer. Practically any input; thermocouples, strain gages, accelerometers, microphones, amplified and unamplified transducers; can be utilized with this layer. Software selectable sample rates, transducer power, and digital filtering; simplify the set-up of any channel. There are also several calibration options including; defined value, external, multipoint; as well as shunt calibrations with embedded software tools when using the Strain SMART Module.

Product Specifications

Physical

Size: 6.9"W x 5.6"L x 0.7"H (18cm W x 14cm L x 2cm H)
Weight: 0.91lbs (0.42kg)
Temperature: -20° to 65° C
Connectors: (4) SoMat M8 Female Bulkhead Connector

Inputs

Range:

Minimum full-scale: ±62.5mV
Maximum full-scale: ±80V

Input Impedance:

10MΩ = Rages up to +/- 10V
100kΩ = Ranges greater than +/- 10V

Resolution: 16-bit ADC, across specified full scale range
Sample Rates: Independently Set

100 kHz Master Clock= 0.1Hz to 100 kHz
98.3 kHz Master Clock= 0.1 Hz to 98,304Hz

Transducer Power:

4V to 15V in 1V increments, 24V
400mW per channel

Filtering:

Analog: 25 kHz, 8-pole Butterworth low-pass filter
Digital: Software selectable; 8-pole Butterworth and Linear Phase

Includes

(4) SoMat SAC-TRAN-MP-2 Transducer Cables (2 m)

Cables and Accessories

Accessories

ICP-Type Signal Conditioning Module

ICP-Type Signal Conditioning Module The SoMat ICP-Type Signal Conditioning Module (EICP) is a part of a family of signal conditioners for the eDAQ and eDAQ-lite HLS layers.

M8 Hex Nut Wrenches

M8 Hex Nut Wrenches The SoMat M8 Hex Nut Wrenches (HDW-0034-00) work with the SoMat M8 transducer and extension cables for both the eDAQ and eDAQ-lite.

Strain SMART Module

Strain SMART Module The SoMat Strain SMART Module (SMSTRB4-xxx) is a part of a family of signal conditioners for the eDAQ and eDAQ-lite HLS layers. The Strain SMART Module provides excellent strain gage signal conditioning with support for 1/4-, 1/2- and full-bridges.

Thermocouple SMART Module

Thermocouple SMART Module The SoMat Thermocouple SMART Module (SMITC) is a part of a family of signal conditioners for the eDAQ and eDAQ-lite HLS layers.

Cables

Extension Cable (0.4 m)

Extension Cable (0.4 m) The SoMat SAC-EXT-MF-0.4 Extension Cable (SAC-EXT-MF-0.4) is a high-quality 0.4 meter pre-molded cord set with Male/Female SoMat M8 connectors.

Extension Cable (10 m)

Extension Cable (10 m) The SoMat SAC-EXT-MF-10 Extension Cable (SAC-EXT-MF-10) is a high-quality 10 meter pre-molded cord set with Male/Female SoMat M8 connectors.

Extension Cable (15 m)

Extension Cable (15 m) The SoMat SAC-EXT-MF-15 Extension Cable (SAC-EXT-MF-15) is a high-quality 15 meter pre-molded cord set with Male/Female SoMat M8 connectors.

Extension Cable (2 m)

Extension Cable (2 m) The SoMat Extension Cable (SAC-EXT-MF-2) is a high-quality 2 meter pre-molded cord set with Male/Female SoMat M8 connectors.

Extension Cable (5 m)

Extension Cable (5 m) The SoMat SAC-EXT-MF-5 Extension Cable (SAC-EXT-MF-5) is a high-quality 5 meter pre-molded cord set with Male/Female SoMat M8 connectors.

Transducer Cable (10 m)

Transducer Cable (10 m) The SoMat Transducer Cable (SAC-TRAN-MP-10) is a high-quality 10 meter pre-molded cord set with tinned pigtail wires for transducer wiring.

Transducer Cable (2 m)

Transducer Cable (2 m) The SoMat Transducer Cable (SAC-TRAN-MP-2) is a high-quality 2 meter pre-molded cord set with tinned pigtail wires for transducer wiring.